Reducing Workplace Noise Exposure in Ireland

20 Mar 2025 | Health & Safety

Health & Safety · Practical guide

Reducing Workplace Noise Exposure in Ireland

Review exposure, source controls and staff instruction for a quieter workplace.

By · HSEQ · Originally published 20 March 2025 · Reviewed 4 November 2026

Worker wearing earmuffs while using a power drill

Make noise control part of everyday work

Noise safety requires more than asking employees to wear ear defenders. Identify exposure, reduce noise where it is produced and organise work so that people are protected throughout the shift. Staff awareness helps those controls work, but a briefing or warning light cannot replace the assessment.

Manufacturing, construction, maintenance and hospitality can all involve noisy tasks. Consider employees who move between areas as well as those operating the loudest equipment. A short task with a sudden high noise level may need attention alongside work that continues for much of the day.

This guide develops five practical areas to review: assessment, source control, suitable hearing protection, staff instruction and monitoring. Use them to structure improvements with competent help where required.

1. Assess exposure across the work people actually do

Start by identifying noisy equipment, activities and work areas. Speak with employees about the tasks they perform, the time spent in different areas and changes in operating conditions. Include cleaning, maintenance, breakdowns and temporary work that may not appear in the normal production schedule.

Arrange a suitable assessment and measurement where needed. A single reading beside a machine does not necessarily describe an employee’s exposure across the day. The assessment must account for the pattern of work and relevant peak noise, with equipment and methods appropriate to the purpose.

Record which tasks were assessed, the conditions at the time and the resulting control actions. If the process or work pattern changes, decide whether the assessment remains representative. Give actions owners and review dates so the report leads to practical improvements.

The HSA noise guidance explains exposure action values and limits. Its daily or weekly action values are 80 and 85 dB(A), with corresponding peak action values of 135 and 137 dB(C). These are triggers for specific action, not a declaration that every exposure below a single displayed number is harmless.

2. Reduce noise at source and organise the workplace

Review whether the noisy process can be avoided or changed. When equipment is replaced, consider noise alongside capacity, price and other safety requirements. Maintain equipment properly and investigate unusual noise that may indicate a fault or deterioration.

Depending on the task, suitable engineering measures may include enclosure, isolation, damping or barriers. These need to be designed and maintained appropriately; an improvised barrier that obstructs access or ventilation may create another problem. Obtain competent input when choosing or modifying controls.

Layout and scheduling can also affect exposure. Separate noisy activities from people who do not need to be nearby, and plan how access will be controlled. Consider how the arrangement works for cleaners, maintenance staff and contractors, not just the usual operator.

Quieter rest areas can support a well-organised working day, but they do not cancel uncontrolled exposure during a noisy task. Similarly, moving people between jobs is useful only when the resulting exposure is properly assessed; rotating several people through the same hazard is not automatically an effective solution.

Worker wearing hearing protection beside construction machinery

3. Choose hearing protection for the assessed exposure

Where hearing protection is needed, select a suitable type and level of protection and ensure that it fits the wearer. Consider compatibility with other PPE, comfort during the task and the need to hear essential warnings and instructions. More attenuation is not always the best choice if it prevents necessary communication.

Provide practical instruction in fitting, use, care and replacement. Check that staff can demonstrate correct use and that suitable supplies are available where required. Ordinary headphones and consumer noise-cancelling features should not be assumed to provide the hearing protection identified by a workplace assessment.

The HSA occupational noise information sheet summarises employer actions at the different exposure levels, including provision and use of hearing protection, information, signs and access controls. Use the assessment to determine the arrangements for your workplace.

Inspect the arrangements during actual work. If earmuffs interfere with another item of PPE or employees cannot obtain replacements, address the cause. A box of hearing protectors in a distant office is not the same as an effective system for wearing them correctly.

4. Use briefings to explain the controls

Keep briefings specific to the work area. Show staff which tasks require controls, where the controlled areas begin and how they should report a change. Explain the reasons for the arrangements in language that the team can understand.

  • Demonstrate fitting and checking the hearing protection used on site.
  • Explain how alarms and essential instructions will be communicated.
  • Review what to do if equipment becomes unusually noisy or a control is damaged.
  • Include temporary workers, contractors and people joining a different shift.
  • Ask for feedback about discomfort, fit and difficulties following the procedure.

Use short workplace examples to test understanding. Ask what the employee would do before entering a noisy area for a brief maintenance task, or if the specified protection were unavailable. Follow up uncertainty with instruction and a check of the practical arrangements.

Keep the record proportionate: what was covered, who attended, what issues were raised and the actions agreed. Revisit the topic when work changes or observation shows a gap, rather than repeating the same presentation regardless of need.

5. Monitor changes and arrange appropriate health surveillance

Monitoring technology can help draw attention to changing conditions, but its purpose and limits need to be clear. Establish what the device measures, where it is installed and who responds to an alert. Do not treat an area display or a phone application as proof of an individual’s full-shift exposure.

Link monitoring to action. An alert should prompt the agreed response, investigation and review of controls. If repeated alerts are routinely ignored, review the settings, communication and work arrangement rather than accepting the display as an adequate control.

Health surveillance is another part of the programme where required. The HSA hearing checks and audiometry guidance explains the arrangements. Involve an appropriate occupational health professional, protect individual health information and use relevant findings to review workplace prevention.

Employees should know how to report hearing concerns and obtain appropriate advice. A hearing check does not replace reducing exposure; its findings can help identify where the control programme needs attention.

Turn the review into a manageable action plan

Select the highest-priority tasks from the assessment and document the next steps. For each action, identify the person responsible, the resources needed and the way completion will be verified. Check the result with the people doing the work before closing it.

For example, if staff report difficulty hearing an evacuation alarm while wearing hearing protection, review the communication and emergency arrangements with competent input. Removing protection in a noisy area should not become the informal workaround. Our fire warden guide explains the wider need for planned evacuation roles.

Use our HSA inspection guide to organise supporting records. For training or help aligning workplace procedures, contact AcornStar or explore HSEQ consultancy support.

Put the guidance into practice.

Discuss the training and procedures your team needs for its everyday work.

Talk to AcornStar →

Keep reading

More insights from AcornStar

Train smarter

Put these insights into practice with certified online training

Flexible, expert-led courses your team can complete on any device — backed by HSEQ consultancy when you need it.