Emerging HACCP Hazards for Irish Food Businesses

12 Mar 2026 | Food Safety

Food Safety · Practical guide

Emerging HACCP Hazards for Irish Food Businesses

Review how emerging chemical, biological and supply risks could affect your hazard analysis.

By · HSEQ · Originally published 12 March 2026 · Reviewed 4 November 2026

Packaged food moving along a production conveyor

Review new information through the actual food operation

A HACCP-based food safety system needs to reflect the food, processes and conditions in the business. New scientific information, a supplier change or a legal development can prompt a review, but it does not follow that every emerging issue becomes a new critical control point in every kitchen.

Start with relevance. Identify whether the material, ingredient, process or route of exposure is present in your operation. Assess the hazard with suitable evidence and competence, decide how it is controlled and record the reasoning. Keep existing biological, chemical, physical and allergen controls effective while the review takes place.

This guide, reviewed on 4 November 2026, considers three areas: food-contact packaging, climate-related changes and supply-chain information. It explains how to turn a credible signal into a proportionate review, without treating a general news report as a complete hazard analysis.

1. Food-contact materials and packaging compliance

Food comes into contact with packaging, utensils, equipment and other materials during preparation and distribution. The FSAI food-contact materials guidance explains that these materials must be compliant and included in the business’s traceability arrangements.

Review what is used and how it is used. A container suitable for one food, temperature or contact time may not be suitable for another. Check the intended use, supplier information and any restrictions before introducing a material or changing the process. A recycling or compostability claim does not establish food-contact suitability.

For packaging, identify the product specification and supplier, the foods it contacts and the conditions involved. Keep relevant supporting information accessible to purchasing and the food safety team. When an item is substituted because the usual stock is unavailable, use the approval process rather than treating packaging as an interchangeable commodity.

What changed for PFAS in food-contact packaging?

From 12 August 2026, Article 5(5) of Regulation (EU) 2025/40 restricts placing food-contact packaging on the market where PFAS concentrations meet or exceed the specified limits. The rule concerns defined concentrations and scope; it should not be paraphrased as proof that every item must contain absolutely no PFAS.

The European Commission’s application notice explains the new restriction and links to implementation guidance. Check the applicable documentation and responsibilities for the organisation’s position in the supply chain. Seek competent advice if the status of an item or the timing of its placement on the market is unclear.

Ask suppliers for appropriate evidence relating to the actual packaging supplied and its intended use. Avoid relying on a broad marketing statement that cannot be connected to the product. Record unresolved questions and do not approve a material for a use that has not been established as suitable.

A practical purchasing review might list the packaging item, supplier reference, food-contact use, supporting documents and the person who reviewed them. This can reveal missing information without requiring kitchen staff to interpret chemical test data beyond their competence.

If an alternative is proposed, assess the whole change. Consider suitability for the food and process, handling, storage, labelling and any relevant performance requirements. Do not assume that paper, aluminium or a plant-based material is automatically an acceptable replacement for every use.

Gloved hands loading equipment in a food testing area

2. Climate-related changes and food safety

The European Food Safety Authority identifies climate change as a driver of emerging risks. Changes in environmental conditions can affect the food system, but the relevance of a particular issue depends on the product, source and process.

For an individual business, review the conditions it can observe and control: supplier changes, transport delays, refrigeration capacity, water supply interruptions and the ability to maintain procedures during unusual weather. Use product-specific official advice and competent assessment where an issue concerns a particular pathogen or contaminant.

Avoid assuming that a European scientific finding proves that a hazard is present in every Irish ingredient or workplace. Equally, do not dismiss a credible alert simply because the business has not encountered the issue before. Establish the connection to the products and supply chain, then decide what action is justified.

Check the resilience of existing controls

Consider how the operation responds to a prolonged warm period, a power interruption or a disruption to water supply. Identify the controls that may be affected, the information staff need and who can decide whether an activity can continue safely. The response should be planned before the interruption occurs.

For example, a delivery delay may affect the conditions under which chilled food arrives. Staff need the acceptance criteria, a way to check the relevant information and a clear response when the criteria are not met. The solution is not to relax the limit because the weather or delivery schedule is difficult.

Where the business uses a private water supply, review the applicable testing, treatment and contingency arrangements with competent input. Do not automatically label a water check as a critical control point without the hazard-analysis reasoning that supports that decision.

Review produce and seafood procedures against the actual products and official guidance. Do not introduce a chemical washing treatment, change a cooking process or assume a supplier test solves the risk without establishing that the control is appropriate and effective.

Our corrective-action guide explains how to plan the response when an established control is not met, including the decision on affected food.

3. Supply-chain changes, alerts and unfamiliar ingredients

A new supplier or ingredient may introduce different information needs even when the menu description stays the same. A substitution can affect allergens, composition, handling instructions, traceability or the suitability of a process. Review it before use rather than updating the paperwork after service.

Define the information required for supplier approval in proportion to the product and risks. Relevant specifications, traceability information and other evidence should be assessed by someone who understands what they establish and what they do not. A certificate or test report is useful only when its scope and relevance are understood.

Consider known product and supply-chain risks using reliable information. Avoid treating a country name alone as proof that a food is safe or unsafe. The actual supplier, product, controls, regulatory requirements and relevant alerts need to be considered together.

Where testing is part of the control or verification programme, use suitable expertise to determine what to test, how to sample and how to interpret the result. A limited test result cannot demonstrate the absence of every hazard in every batch.

Make alert monitoring and traceability usable

Assign responsibility for checking official food alerts and communicating relevant information to the people who can act. The review should establish whether the named product, batch or supplier is connected to stock, production or food already supplied by the business.

Keep supplier and batch information in a form that can be found promptly. Test the arrangement with an internal exercise: choose an ingredient batch and establish where it was used and what records support the answer. Identify missing links and correct the system before relying on it during a real incident.

If an alert or other evidence identifies affected food, follow the applicable instructions and the business’s incident procedures. Make sure all relevant shifts and locations receive the information. Record what was checked, what was found and the actions taken.

Our allergen awareness guide and food labelling guide explain related information controls when ingredients or products change.

A practical sequence for reviewing an emerging issue

Use a consistent review process so that important information is acted on without adding every headline to the HACCP plan. The food safety team should be able to explain both the action taken and the reasoning where no change is needed.

  • Identify the source of the information and whether it is official guidance, scientific evidence, a legal requirement or an unverified report.
  • Establish the affected products, materials, suppliers or processes.
  • Assess the hazard and existing controls with appropriate competence.
  • Determine whether procedures, supplier approval, monitoring or other arrangements need to change.
  • Record responsibilities, interim controls and the information staff need.
  • Validate new or changed controls where required and verify implementation.
  • Review the outcome and keep the system current.

The FSAI HACCP principles provide the foundation. A hazard may be controlled through prerequisite hygiene arrangements or another appropriate part of the system; the critical-control-point decision needs to follow the analysis.

Give people the information and authority to act

Purchasing, production, service and management may each hold a different part of the relevant information. Agree how a change moves between them. A supplier email is not an effective control if it never reaches the person approving a recipe or packaging substitution.

Keep instruction specific to the role. A buyer may need to know which evidence to obtain and who approves it; a food handler may need a revised procedure and a clear escalation point. Managers need to provide the resources and follow-up that make the change work.

Our manager training guide and food safety culture guide explain how responsibilities and reporting support the system. To discuss a review of procedures or training needs, contact AcornStar.

Put the guidance into practice.

Discuss the training and procedures your team needs for its everyday work.

Talk to AcornStar →

Keep reading

More insights from AcornStar

Train smarter

Put these insights into practice with certified online training

Flexible, expert-led courses your team can complete on any device — backed by HSEQ consultancy when you need it.