Manual Handling Injuries in Ireland: What the HSA Data Shows
See what the HSA reported about manual handling incidents in 2024 and how Irish employers can use task assessment to reduce risk.

What the HSA figures show
The Health and Safety Authority recorded 3,474 non-fatal incidents triggered by manual handling in 2024. That was approximately 33% of the 10,441 non-fatal incidents reported to the authority for the year. Manual handling was the most frequently recorded trigger in that dataset.
The figures are from Figure 1.1 of the HSA Annual Review of Workplace Injuries, Illnesses and Fatalities 2023–2024, published in 2025. They refer to incidents in 2024, not incidents occurring in 2025. They describe reports made to the HSA and should not be presented as a count of every manual handling injury in Ireland.
For an employer, the useful next step is to examine the handling tasks in the workplace. National figures show why the subject deserves attention; they cannot tell you whether a particular delivery route, storage arrangement or lifting task is safe.
Look beyond a training certificate
A manual handling course can support knowledge and skills, but it does not remove a poorly designed task. If staff must repeatedly move awkward loads through a congested area, another reminder about technique will not solve the layout or equipment problem.
Start by asking whether the handling can be avoided. Where it remains necessary, assess the task and reduce the risk through suitable organisation, equipment and work design. Instruction and supervision should support the controls people are expected to use.
The HSA manual handling risk management guidance explains this approach. The relevant Irish regulations are in Part 2, Chapter 4 of the General Application Regulations. Use the requirements and guidance alongside a competent assessment of the actual work.
Observe the task as it is really performed
Walk through the job with the people who do it. Include busy periods, deliveries, cleaning and less frequent tasks such as moving stock or changing equipment. A procedure written for an empty workspace may not reflect the conditions during normal operations.
- What is moved, and can the load be reduced, divided or delivered differently?
- Where does the movement start and finish?
- How often is the task repeated and how far is the load carried?
- Does the task involve reaching, twisting, awkward grip or restricted space?
- What equipment is available, and can it actually be used along the route?
- What happens when the usual equipment or colleague is unavailable?
Ask workers where they struggle and why existing controls are sometimes bypassed. Record the task clearly enough that someone reviewing the assessment can recognise the work. Avoid relying on a generic description such as “lifting boxes” when the important details differ between locations.


Choose controls that change the work
Consider changes to supply, storage and movement before relying on individual technique. For example, a store receiving heavy cartons at floor level could discuss smaller units with the supplier, improve unloading arrangements or use a suitable handling aid. Check how stock is then placed on shelves and retrieved later.
A handling aid needs to suit the load, route and environment. Check access, floor conditions, turning space and storage. If the aid is kept far from the task or blocks another activity, staff may find it difficult to use consistently. Involve the people doing the work when choosing and testing the arrangement.
Changes can introduce other risks. A trolley may reduce carrying but create a problem on a slope or in a narrow passage. Review the whole task after the change rather than assuming that buying equipment has completed the assessment.
Connect training with the assessed task
Identify what employees need to understand and demonstrate under the revised procedure. Explain why the control was chosen, how to use the equipment and what to do if the normal arrangement is unavailable. Make reporting a problem straightforward.
For practical tasks, establish how the learner will demonstrate safe use of the relevant equipment and techniques. Ask the training provider how its course relates to workplace practice, assessment and any additional practical arrangements. Do not assume that completing online theory alone verifies every task performed at work.
Check the current AcornStar Manual Handling course and ask about practical arrangements for your team. Give the provider an accurate description of the work so that the training can support the controls identified in the assessment.
Supervisors also need to recognise when a task has changed or when equipment is unsuitable. They should know how to arrange a review rather than asking employees to continue with a method that no longer fits the situation.
Record actions and check that they work
Give each improvement an owner, a due date and a way to verify completion. Where a permanent change takes time, identify appropriate interim arrangements through the risk assessment. A list of proposed purchases is not evidence that the risk has been controlled.
After introducing a change, observe the task again and ask workers whether the new arrangement is usable. Check that equipment is available, maintained and stored where needed. Look for unexpected workarounds or movement of the problem to another part of the process.
Keep the assessment, decisions, training and follow-up together. This helps a new manager understand why the arrangement exists and what needs reviewing after a change in deliveries, staffing, layout or equipment. Our HSA inspection preparation guide explains how to organise records around the work they support.
Use workplace evidence alongside national data
Review local incidents, near misses, equipment faults and concerns raised by staff. Look for repeated tasks or locations, rather than treating each report as an isolated event. Include informal observations that show a control is difficult to follow.
Choose measures that help you manage the work: assessments reviewed after changes, actions completed, equipment available and practical checks carried out. A low number of reports is not, by itself, proof that conditions are safe; staff need to feel able to raise concerns.
Discuss findings with the team and explain what changed as a result. This gives reporting a practical purpose and helps identify problems before they become established working habits.
Frequently asked questions
Are these statistics for 2025?
No. The cited review was published in 2025 and reports the 2024 incident figures described above. Keep the incident year and publication year separate when using the data.
Does everyone need the same manual handling training?
Assess the work and the skills needed to carry it out under suitable controls. Different loads, equipment and environments can require different instruction and practical checks.
Is buying a trolley enough?
Only if the assessed arrangement is suitable and works in practice. Check the load, route, equipment condition, access and staff instruction, then review the task after the change.
For help reviewing tasks and workplace procedures, explore AcornStar’s HSEQ consultancy services.
Put the guidance into practice.
Discuss the training and procedures your team needs for its everyday work.
Talk to AcornStar →


