Workplace Risk Assessment for Irish Employers
Identify hazards, assess risk, choose controls and record who will follow up.

Workplace Risk Assessment Requirements in Ireland
A workplace risk assessment identifies what could cause harm, who could be affected and the measures needed to control the risks. For Irish employers it is part of the legal framework for managing safety, health and welfare at work. This guide sets out a practical sequence for examining the work, recording decisions and checking that improvements are implemented.
What a Risk Assessment Really Is
A risk assessment is a careful look at what in your workplace could cause harm, who it could harm, and whether you’ve done enough to prevent it. Two terms worth pinning down:
A hazard is anything with the potential to cause harm a chemical, a machine, a slippery floor, a stressful workload.
A risk is the chance that someone will actually be harmed by that hazard, combined with how serious the harm could be.
Done well, risk assessment turns safety from reactive fire-fighting into proactive prevention. It becomes part of how you run the business, not a document you dust off for inspections.
Why Risk Assessment Matters Under Irish Safety Law
Section 19 requires every employer to identify hazards, assess the risks associated with those hazards, and prepare a written assessment.

A practical sequence for assessment and action
The following five-part sequence organises hazard identification, risk evaluation, action and review into a practical workflow. The HSA also presents risk assessment through three basic questions: identify hazards, assess risks and put controls in place. The substance and implementation matter more than the number of headings used.
Step 1: Identify the Hazards
Start by taking a proper walk around your workplace with fresh eyes. Look for anything that could reasonably cause harm. Don’t rely on memory — things change, and small hazards are easy to miss when you see them every day.
- Workplace hazards generally fall into five categories:
- Physical — machinery, vehicles, working at height, noise, vibration, manual handling, slips, trips, and falls.
Chemical — cleaning products, solvents, fuels, dust, fumes, and any substances that are toxic, corrosive, or flammable.
- Biological — bacteria, viruses, fungi, and other microorganisms that can cause infection.
- Ergonomic — poor posture, repetitive motions, badly designed workstations, and display screen equipment issues.
Psychosocial — workplace stress, bullying, harassment, excessive workloads, and work organisation factors that affect mental health.
Use a mix of methods to spot hazards. Walk-around inspections help. So do accident and near-miss records, manufacturers’ instructions, safety data sheets, and HSA sector guidance.
Consult the people doing the work and their safety representatives as appropriate. Ask about routine tasks, unusual conditions and workarounds. Their experience can reveal gaps that a walk-through alone would miss.
Step 2: Decide Who Might Be Harmed and How
For every hazard, think about who could be affected. That includes your employees, but also contractors, agency staff, visitors, delivery drivers, cleaners, and members of the public.
- Pay particular attention to groups who may face higher risks:
- Young workers under 18, who may lack experience recognising hazards.
Pregnant employees and new mothers , who face specific risks from certain chemicals, biological agents, and physical work.
- Lone workers , who don’t have help nearby if something goes wrong.
- Workers with disabilities , where controls may need adjusting to keep them safe and accessible.
New starters, contractors, and migrant workers , who may be unfamiliar with your site or face language barriers.
Be specific about how harm could occur. For example, moving a bulky load through a narrow route may create handling and collision risks. That description points towards redesigning the task, route or equipment, rather than assuming that training alone is the answer.
Also think about work patterns. Shift workers, part-timers, and maintenance staff often face different risks than daytime production teams, so your assessment needs to cover all of them.
Step 3: Evaluate the Risks and Choose Control Measures
Evaluate the likelihood and potential severity of harm, taking account of the people exposed and the controls actually in place. A risk matrix can help organise priorities, but it is not a substitute for considering the hazard, relevant requirements and adequacy of the controls.
Apply the relevant legal duties and prevention principles when choosing controls. Do not use a low numerical score or a simple cost comparison to justify ignoring a required precaution. Obtain competent specialist help where the assessment requires knowledge or measurements beyond the organisation’s capability.
When you’re choosing controls, always work through the Hierarchy of Controls from the top down. The higher up the list, the more reliable the control:
- Elimination — remove the hazardous activity or redesign the task so the exposure is avoided.
Substitution — use a less hazardous substance, process or piece of equipment after assessing the risks of the alternative.
Engineering controls — physical measures that separate people from the hazard, like machine guards, local exhaust ventilation, guardrails, or noise enclosures.
Administrative controls — safe systems of work, training, signage, permits to work, job rotation, and procedures.
Personal Protective Equipment (PPE) — the last line of defence for risks that can’t be controlled any other way.
A common mistake is jumping straight to PPE because it’s cheap and quick. PPE should back up more effective controls not replace them.
Step 4: Record Your Findings and Put Controls in Place
Section 19 of the 2005 Act requires employers to have a written risk assessment. There is no general exemption from this duty for businesses with fewer than three employees. A separate, limited provision allows an employer with three or fewer employees to fulfil the Safety Statement duty by complying with a relevant HSA Code of Practice where one exists for that activity.
- A good record should clearly show:
- The work activities and areas covered
- The hazards identified and where they come from
- Who might be harmed
- The controls already in place
- Any further controls needed, who’s responsible, and by when
- The date of the assessment and when it will be reviewed
Keep it specific. The HSA expects risk assessments to reflect your actual workplace not a generic template copied off the internet. A bakery and a warehouse face very different risks, and your paperwork should show that.
Implementation is where most risk assessments succeed or fail. Assign clear responsibilities, set realistic timelines, and make sure the people doing the work know what the controls are, why they matter, and what to do if something goes wrong. Training flows directly from your risk assessment, so it should be specific to the hazards and controls in your workplace not generic safety awareness.
Step 5: Review and Update the Assessment
A risk assessment isn’t a one-off exercise. Workplaces change, and your paperwork has to keep up.
- Review your risk assessment whenever there’s a significant change, including:
- A workplace accident, near-miss, or dangerous occurrence
- New equipment, substances, or processes
- Changes to the layout of the workplace
- Changes in the workforce (new starters, different shift patterns, young or pregnant workers)
- Updates to legislation or HSA guidance
Set a planned review interval appropriate to the operation, and review sooner when there is a significant change or reason to believe the assessment is no longer valid. Do not wait for the calendar date after an incident, a changed task or evidence that a control is ineffective.
Risk Assessment Examples by Sector
The five-step process stays the same across every sector, but the hazards change. A few practical examples:
Construction — working at height, manual handling, mobile plant, excavations, noise, dust, and coordinating multiple contractors on site. Site conditions change daily, so assessments need to be dynamic.
Manufacturing — machine guarding, lockout/tagout, noise, chemical handling, manual handling in warehousing, and fire and explosion risks.
Healthcare — infection control, manual handling of patients, sharps injuries, aggression from patients or visitors, and chemical exposure from cleaning products and medical gases.
Offices — display screen equipment, ergonomics, slips and trips, fire safety, manual handling of supplies, and psychosocial risks like workload pressure and poor working relationships.
Common Risk Assessment Mistakes to Avoid
- Even well-meaning employers slip up. Watch out for these:
- Generic tick-box assessments copied from templates that don’t match your workplace.
Leaving workers out of the process the people doing the job know where the shortcuts and pinch points are.
- Overlooking psychosocial hazards and work organisation factors when examining the risks.
- Jumping straight to PPE instead of working through the hierarchy of controls.
- Failing to implement and verify the actions identified by the assessment.
- Never reviewing the assessment after changes to equipment, processes, or the team.
- 5-step risk assessment checklist
- Identify all hazards through inspection, records, and worker consultation.
- Decide who might be harmed and how, including higher-risk groups.
- Evaluate the risks and choose controls using the Hierarchy of Controls.
- Record your findings and put controls in place, with clear responsibilities and deadlines.
- Review and update the assessment regularly and after any significant change.
Connect the assessment with working procedures
Translate each control into an arrangement that people can follow. Specify the equipment, instruction, supervision and checks required, and identify what happens if a control is unavailable. For material movement, see our manual handling guide; for emergency arrangements, see workplace fire safety.
Review actions with the workers affected and record evidence that the improvement works. Our safety culture guide explains how reporting and management follow-through support the process. Include work-related stress and wellbeing where the assessment identifies relevant organisational factors.
Use the official HSA Safety Statement and risk assessment guidance and Section 19 of the 2005 Act for the underlying requirements. For practical support, discuss the scope of your assessment with AcornStar.
Put the guidance into practice.
Discuss the training and procedures your team needs for its everyday work.
Talk to AcornStar →


